Are you looking for a contractor?
Submit our quick form and get quotes now!
Wood varnishes are in place to protect the natural textures and colour of the hardwood while adding an additional attractive shine and finish. However, it is only natural for your hardwood floor varnish to wear over time, as floors come up against constant movement leading to the potential for scuffing and stains. Of course, a hardwood floor can easily be re-stained with a little bit of time and a fair amount of elbow grease.
There are several possible methods for homeowners to follow to refinish their floors. If you’re ready to take on the task yourself and looking for a step-by-step guide to follow, search no further. Below, you’ll find everything you need to strip and refinish your hardwood floors!
Here's how to strip and refinish hardwood floors!
Strip your hardwood floor
source: Flickr, gregoryswan
The first step to stripping your hardwood floors is to apply a paint stripper to remove the old varnish. If your floor has been painted for whatever reason, use a liquid stripper instead. Apply this with a paintbrush instead of pouring the stripper directly onto the floor, as wood is very porous and sensitive to saturation.
An alternative is to use a spray stripper, which will come in an aerosol can, and this method can be applied directly to the surface of the floor. It is important to note that homeowners should only use a gel stripper if looking to remove the varnish as well as the paint, as gel strippers work to remove several layers.
Remove and Clean Off the Varnish
The next step to stripping your hardwood floors is to remove the varnish from the surface of the floor. The varnish will have loosened by way of the paint stripper that was previously applied, and therefore, will be relatively easy to scrape off. You can scrape off the varnish using one of two methods: either by way of a chemical-resistant scrapper blade or using a damp mop.
Make sure that if you choose to remove the stripper using a mop that it isn’t soaked. Regardless of the method you choose, complete this process carefully and vacuum the floor directly afterwards.
Sand the Surface
If you find that the varnish has not disappeared, you may have to sand down your floors. To complete this step, you will need the aid of a belt, disk or drum sander with a coarse sandpaper. Before you begin sanding, make sure to put on protective eyewear in order to shield against small flying debris as well as a large amount of dust that will accumulate.
To start the sanding process, work from the centre of the room, turn the sander on and tilt it upwards. Sand across the room in the same direction as the grain on your hardwood floors. Further, make sure to always keep the sander in motion during the process. Make your way towards the wall, and once you reach it, return the sander to the centre of the room and move on to the next section until the entire floor has been sanded.
Finish the Job
source: Flickr, Garth
Following the sanding process, vacuum the area to rid of any dust that the sander created. Once the floor is clean, sand it again using fine sandpaper, as this will smooth out the floor while providing the finishing touches. Make sure that no varnish remains on the surface of the hardwood floor surface.
If you are still finding patches that haven’t been removed, these can be removed with an electric paint remover, which will heat the varnish to remove it. Following this, scrap the varnish from the floor with the previously mentioned paint scraper.
Get 3 renovation quotes for your hardwood flooring refinishing project
RenoQuotes.com can help you get quotes for your hardwood flooring renovation project. If you submit your project to us, we’ll put you in contact with top-rated contractors. Fill in the form on the homepage (it only takes a few minutes), and you will get estimates from trusted professionals.
Dial 1-844 828-1588 to speak with one of our customer service representatives
Looking for something else?
Related articles
The latest industry news, interviews, technologies, and resources.
Léa Plourde-Archer • 07 Nov 2023
At first glance, the role of a general contractor can seem vague. Acting as a conductor of sorts for home renovation projects, general contractors are responsible for ensuring the successful completion of the project, making sure that the whole process runs smoothly.
RenoQuotes.com • 07 Nov 2023
The industrial-style kitchen has been making the round for close to five years now. More popular than ever, its charm is no longer limited to city-centre lofts or condos and is now also prominently featured in rural or suburban homes. It’s both cozy and authentic, and functional and robust. Suffice it to say: it has a little something that pleases all.
Karine Dutemple 2 • 07 Nov 2023
Who said a ceiling has to be dull and boring? If yours lacks style and borders a little too close on the tedious, here are some design ideas that might interest you!
RenoQuotes.com • 07 Nov 2023
Renovating your home to update surfaces, fixtures or other aspects is the reality of many homeowners. This is especially true if you’re looking to modernize or make rooms more comfortable and beautiful.
RenoQuotes.com • 07 Nov 2023
Your kitchen floor comes up against all kinds of dirt, grime and wear and tear from heavy feet, falling pots and pans as well as spills from burning liquids. Thus, your kitchen floor must be tough enough to withstand all the various things that get thrown its way, while still looking stylish and blending in with the overall decor of your home.