Are you looking for a contractor?
Submit our quick form and get quotes now!
Having a wrought iron staircase on the exterior of any home is lucky. Wrought iron staircases are beautiful pieces that add to the resale value of the property as a highly sought-after item. This type of staircase is forever, with limitless design options. They do not show dust and are easy to clean and to maintain.
However, like most metals, if wrought iron isn't correctly looked after, it will rust and deteriorate. Neglecting to notice changes taking place such as loose components, misaligned pieces, sagging as well as broken railings can lead to serious problems which will become more difficult to fix the longer they're left as is.
Photo: Pexels
Find out how to repair your wrought iron staircase
Wrought Iron fighting the Elements
Although wrought iron is gorgeous, it needs to be carefully looked after in order to maintain its' elegance. When left untreated and unprotected from the elements, it will begin to decay. Depending on the amount of damage, the restoration and reparation methods, as well as the costs, will vary.
When a wrought iron staircase is outside, a few things can occur that lead to its deterioration. Firstly, if the railings have been set in precast cement, it is common for the cement to corrode around the base, causing rainwater to pool around the iron, which leads to rust and deterioration at the bottom of each railing. This often leaves the main part of the railing in good shape, as damage is concentrated to the base.
Another way that wrought iron railings sustain damage is general rust and peeling paint along the body. Both forms of deterioration are easily treatable, though you should make sure to check how bad the damage is before moving forward with any form of reparation. If you find the railing itself is unsafe, then it is recommended to speak to a professional!
Repairing a Wrought Iron Staircase: the main steps
source: Flickr, Paul Butler
1) Remove the ramp
If you've found that the damage isn't too bad, you can move forward with the repairs. If only the bottom is damaged, the entire railing can be removed from its place by cutting with a saw or bending to break free. Make sure to drill out pieces of old railing that are left in the cement. This can be done with a hammer-drill.
2) Fill in the empty spaces
Now, the bottoms of the railing will be missing. One can bridge the gap by inserting a threaded rod at either end of the rail. An alternative method is to squeeze bonding adhesive into pre-purchased hollow railing legs and insert leg extensions into the bottom of the railing. Either method works, though the cost of the job will vary depending on the materials you choose.
3) Prime the metal and conceal the repair
Prime any raw steel leftover from this job, so that it won't rust. Following this, use an auto-body filler to hold the rod in place and mask the repair. The filler should be sculpted to mimic the shape of the rail and can be sanded once it hardens. Then, you are welcome to go ahead and paint the auto-body filler to match the colour of the rails.
4) Finish repairing and apply the new coat of paint
Before reattaching the railing in place, it is necessary to refinish and repaint it. If you found the railing to have any peeling paint or rust on the body, now is the time to remove it. A pressure washer works for this job but isn't an accurate method to remove paint. In order to remove paint and rust accurately, you will need a wire brush that attaches to a drill.
With this tool, excess rust and paint should fall away easily. Following the removal of excess paint and rust, your iron railings should be sprayed with a rust-inhibiting primer, followed by two coats of quality oil-based enamel to help extend the longevity of the railing.
In Canada, indoor wrought iron staircases are not as common as the outdoor railings. However, they do exist here and there. Indoor wrought iron will not deteriorate as quickly or harshly, as it does not deal with the same elemental stresses. With that in mind, it is still important to take care of your indoor wrought iron elements, as they could chip, rust and begin to fall apart if they aren't correctly looked after. The reparation method for indoor or outdoor staircases is the same, so proceed accordingly.
Costs to Repair a Wrought Iron Staircase
The cost of repairing a wrought iron staircase will differ greatly depending on the amount of damage done to both the surrounding staircase or base, as well as the railings themselves. For a simple DIY job as listed above, costs can run anywhere from $10-150 for the materials needed, depending on the materials chosen.
If you are replacing the spindles, the cost will vary greatly depending on the pattern you choose, as more intricate patterns run at higher costs. In Canada, on average, an individual spindle unit can run anywhere from $10-35 at basic home store retailers, while custom designs run much higher. It is important to do significant research before purchasing, or contact a professional and have them quote you on a price for the entire job.
Recap of the steps to repair a wrought-iron staircase
Repairing a wrought-iron staircase |
1. Remove the ramp |
2. Fill in the spaces |
3. Prime the metal and conceal the repair |
4. Complete the finishing steps and apply the new paint |
Get 3 renovation quotes for your wrought iron staircase renovation project
RenoQuotes.com can help you get quotes for your wrought iron staircase renovation, project. If you submit your project to us, we’ll put you in contact with 3 qualified professionals. Fill out the form on our homepage (it only takes a few minutes), and you will receive quotes from trusted renovation specialists.
Dial 1-844 828-1588 to speak with one of our customer service representatives
Looking for something else?
Related articles
The latest industry news, interviews, technologies, and resources.
RenoQuotes.com • 06 May 2024
Taking on a home renovation is a big commitment that involves a large amount of time, stress and money. Hiring a renovation contractor means putting your trust in a stranger, and the trust is serious, as it involves your home. Unfortunately, contractors do not have the best reputation for upholding their end of the bargain.
RenoQuotes.com • 07 Nov 2023
Raw materials are all the rage when it comes to designing modern kitchens. Unlike wood, which is chosen for its essence, veining, and grain, concrete is made from a mixture that’s poured into a mould to create a heavy and uniform mass.
Cynthia Pigeon • 07 Nov 2023
Do you live in a rural area or have a summer house with a wastewater disposal system that isn't connected to your local water systems? If so, you probably have a functioning septic system in place.
Cynthia Pigeon • 07 Nov 2023
There are few communal spaces in a home that is as welcoming as the family room. Even if we often meet around the kitchen counter or around the dining room table, the family room has a little something extra, perfectly suited to share, swiftly making it the dedicated resting or entertainment space.
Cynthia Pigeon • 07 Nov 2023
Are you looking to add hardwood floors in the common areas of your house hoping to create a rustic feel? Cherry wood flooring, although not the cheapest option, has an exotic essence and makes for a durable choice due to its sustainable material.